Targus PDAs Smartphones iPAQ3900 User Manual

Targus Click N Type  
for Compaq iPAQ 3800/3900  
Making Your Mobile Life Easier.  
USER’S GUIDE  
Making Your Mobile Life Easier.  
Features and specifications are subject to change without notice. © 2002 Targus Corp.  
400-0090-001A  
BRUSSELS HANNOVER BARCELONA TOKYO MILANO AMSTERDAM SINGAPORE  
LONDON PARIS NEW YORK LOS ANGELES TORONTO HONG KONG SYDNEY  
 
 
Targus Click N Type  
Congratulations on your purchase of the Targus Click N Type.  
The Click N Type is a convenient and ultra-portable keyboard  
and mouse for your PDA.  
With the Click N Type you can:  
• Enter text directly into your PDA.  
• Use the 8-way navigation button to simulate mouse movement.  
• Define and use the function keys to quickly execute commands  
and options.  
• Take a keyboard and mouse with you whenever you travel with  
your PDA.  
In addition to this user’s guide, this package contains the Targus  
Click N Type and the driver software CD-ROM.  
Installing the Driver  
To install the driver software for the Click N Type, you need:  
®
• A desktop or notebook computer with the Windows 95/98/  
®
Me/2000/XP or Windows NT 4.0 operating system  
®
®
• Microsoft ActiveSync 3.1 or higher on your computer (for  
copying files to your PDA). For the most current version of  
Microsoft ActiveSync, go to: http://www.microsoft.com/mobile  
• At least 24K bytes of free memory on your PDA.  
1 Connect your PDA to your computer, if it’s not already  
connected, and synchronize to back up your files.  
2 Disable any previously installed keyboard software on your  
PDA.  
 
3
 
3 Insert the driver software CD-ROM into your computer’s  
CD-ROM drive.  
4 Click Start, Run, then enter D:\Setup.exe (where D: is the  
path of your CD-ROM drive) and then click OK.  
The Click N Type Installation screen appears.  
PDA Mouse Click N Type Installation screen  
5 Click Install.  
6 Follow the on-screen instructions to complete installation.  
7 Synchronize to copy the driver to your PDA.  
After synchronization, the Click N Type icon appears in the  
Applications screen on your PDA. You can now connect the  
Click N Type to your PDA.  
 
4
Connecting the Click N Type to  
Your PDA  
Once you have installed the driver, you can connect the Click N  
Type to your PDA. To do this:  
1 Turn off your PDA (if it’s turned on).  
2 Hold your PDA in one hand and the Click N Type in your  
other hand.  
Holding your PDA and the Click N Type  
 
5
3 Align your PDA with the keyboard connector, located at the  
top of the Click N Type.  
Keyboard  
connector  
Aligning your PDA with the keyboard connector  
4 Gently slide your PDA into the keyboard connector until you  
hear a “click.”  
When you connect the Click N Type, your PDA automatically  
turns on and you can begin typing.  
CAUTION: Always use the keyboard connector as a guide  
when connecting and disconnecting your PDA to avoid  
possible damage to your device or the Click N Type.  
 
6
Disconnecting the Click N Type  
To disconnect the Click N Type from your PDA:  
1 Turn off your PDA (if it’s turned on).  
2 Press the release button, located on the back of the keyboard,  
and gently pull your PDA away from the Click N Type,  
sliding it out of the keyboard connector.  
CAUTION: Avoid pressing any keys on the Click N Type when  
disconnecting it from your PDA, as doing so may cause the  
key to stop working.  
Using the Click N Type  
NOTE: The Click N Type does not require batteries. Instead, it  
runs off of a small amount of power, which it draws directly  
from your PDA.  
Enabling the Click N Type  
After installing the driver and connecting the Click N Type to  
your PDA, you can enable the keyboard through the main  
application screen.  
 
7
To enable the Click N Type:  
1 Tap Start, then Click N Type.  
The main application screen appears.  
Sample main application screen  
2 Tap on the box next to Enabled so that a check mark appears.  
You are now ready to customize and use the Click N Type.  
Customizing the Click N Type Options  
Once you enable the Click N Type, you can view and customize  
its options through the File menu on the main application screen.  
 
8
To customize the Click N Type option:  
1 Tap Start, Click N Type, then File.  
The File menu appears.  
Sample File menu  
2 Select the option you want to view or customize.  
The available options are:  
• About  
• Help  
Shows the software version and copyright  
Lists the online Help topics  
• Function Keys Defines the programmable function keys  
• Keyboard Speed Specifies the keyboard repeat rate settings  
• Mouse Speed  
Specifies the mouse speed settings  
 
9
About  
The About screen in the Click N Type application allows you to  
view the software version and copyright information.  
Help  
The Help screen in the Click N Type application displays the  
online help topics.  
Find the topic you want to learn more about and select the link to  
view more information.  
Function Keys  
The Function Keys screen in the Click N Type application  
provides twelve user-definable function keys, consisting of keys  
F1 to F4 with and without a modifier.  
Sample Function Keys screen  
 
10  
To define the function keys:  
1 Choose a modifier (Shift or Fn) that you want to assign as a  
part of the key sequence, or select None, from the drop-down  
menu.  
2 Tap the function key that you want to assign.  
3 Select a mode from the drop-down menu. The options are:  
• Run – which allows you to either open a specific  
application or open an application in association with a  
specific file.  
• Paste – which allows you to paste text that you type in, or  
to simulate the Ctrl-V paste function, which pastes the  
current contents of the clipboard.  
• Special – which allows you to select a pre-programed  
function from the drop-down menu. Some of the special  
functions, such as LR Tap (lower-right tap), simulate  
stylus taps so that you can access icons on your PDA  
screen more quickly.  
4 Enter any details in the box provided, such as an application  
or file name or specific text, or select a special feature from  
the drop-down menu.  
5 Repeat steps 1 through 4 to define additional function keys.  
6 To save your settings, close the window by tapping Done on  
your PDA screen.  
 
11  
Keyboard Speed  
The Keyboard Speed screen in the Click N Type application  
allows you to regulate the keystroke repeat function.  
Sample Keyboard Speed screen  
Delay until repeat: allows you to set the length of time before  
a letter, number or other character begins to repeat when you  
press and hold a key. The settings range is 1 (short) to 10  
(long).  
Keyboard repeat rate: allows you to set the speed at which a  
letter, number or other character repeats when you press and  
hold a key. The settings range is 1 (slow) to 10 (fast).  
Test Area: allows you to test the delay and repeat rate by  
holding down a letter or number key on the Click N Type. The  
character repeats according to the settings you have chosen.  
Change and test these settings until you achieve the desired  
outcome.  
 
12  
Mouse Speed  
The Mouse Speed screen in the Click N Type application allows  
you to regulate the rate at which the mouse (8-way navigation  
button) moves the cursor across the screen.  
Sample Keyboard Speed screen  
Mouse Speed Slow: allows you to set the speed at which the  
cursor normally moves. The settings range is 1 (slow) to 10  
(fast).  
Mouse Speed Fast: allows you to set the higher speed at  
which the cursor moves, after the speed delay, when you press  
and hold down the mouse button. The settings range is 1 (slow)  
to 10 (fast), but the corresponding speeds are faster than for  
Mouse Speed Slow.  
Mouse Speed Delay: allows you to set the length of time  
before the cursor changes from slow speed to fast speed when  
you press and hold down the mouse button. The settings range  
is 1 (short) to 10 (long).  
 
13  
Using the Keyboard Mouse  
With the Click N Type’s 8-way navigation button, you can  
control the cursor’s movement and tap items on your PDA’s  
screen — all “stylus-free.”  
Click N Type 8-way navigation button  
Press the arrows on the navigation button to move the cursor  
across the PDA’s screen. To “tap” an on-screen option, press the  
checkmark key on the Click N Type. To “tap and hold” an on-  
screen option, press and hold the checkmark key on the Click N  
Type.  
NOTE: The mouse turns itself off after two seconds of  
non-operation or when you press any key on the Click N Type.  
Typing Keyboard Shortcuts  
The following table details the key sequences you can use to  
access options and additional characters, and to issue commands  
to your PDA from the Click N Type.  
To use these key sequences, hold down the Ctrl, Fn, or Shift key  
(as indicated) and then tap the second key listed in the table for  
the desired result.  
To access the characters that are imprinted in red, press  
Fn + <key>.  
 
14  
Keyboard Combinations  
Key Sequence  
Result  
1
2
Shift + any key  
Caps  
Enters uppercase character  
Toggles between all upper or lowercase  
characters  
3
4
5
6
7
8
Fn + any key  
Shift + ↑  
Activates the red symbol on a key  
Highlights line of text above cursor  
Highlights line of text below cursor  
Highlights character to right of cursor  
Highlights character to left of cursor  
Shift + ↓  
Shift + →  
Shift + ←  
Fn + Mouse  
Emulates the left/right and up/down arrows on  
a keyboard  
9
Mouse  
Moves the cursor in the same manor as a  
regular mouse  
10 Ctrl + X  
11 Ctrl + C  
12 Ctrl + V  
13 Ctrl + A  
14 Ctrl + Z  
15 Fn + Backspace  
16 Tab  
Cuts selected text  
Copies selected text  
Pastes cut or copied text  
Selects all text  
Undoes last command  
Del  
Tab  
17 Ctrl + Q  
18 Ctrl + N  
Close Program  
New  
 
15  
Troubleshooting  
What should I do when I type on the keyboard and nothing  
happens?  
• Check that your PDA is charged.  
• Make sure that your PDA is firmly connected to the Click N  
Type.  
Verify that the keyboard driver is installed on your PDA.  
• Remove the keyboard driver and then reinstall it. To do this:  
1 Tap Start, then select Programs.  
2 Tap File Explore, then select My Device.  
3 Tap Windows, Start Menu, then tap and hold Click N Type  
and select Delete from the drop-down menu.  
4 Tap Yes to remove the keyboard software, or No to cancel  
the operation.  
5 Install the driver software, following the instructions in  
“Installing the Driver” on page 3.  
Does the Targus Click N Type require batteries?  
No — the keyboard uses only a small amount of power, which it  
draws directly from your PDA. Alternately, you can charge your  
PDA while using the Click N Type by connecting an AC adapter  
to the AC adapter port, located at the bottom of the keyboard.  
What should I do if my PDA screen goes blank while I’m  
typing? (For Pocket PC 2002 users only)  
To keep your PDA screen from turning off during use, turn off  
the backlight option. To do this:  
1 From the Settings Menu, select Power.  
2 Tap Adjust backlight settings.  
3 Select Turn off backlight so that the check mark disappears.  
 
16  
Technical Support  
In the unlikely event that you encounter a problem with your  
Targus accessory, please contact our technical support team at:  
Our knowledgeable staff is also available to answer your  
questions through one of the following telephone numbers.  
US  
Monday through Friday, 8:00 a.m. (08:00) to 8:00 p.m. (20:00)  
Eastern time:  
800-283-6325  
Canada  
Monday through Friday, 9:00 a.m. (09:00) to 5:00 p.m. (17:00)  
Eastern time:  
888-827-4877  
Europe  
Belgium +32 0 02-717-2451  
Denmark +45 0 35-25-8751  
France +33 0 1-64-53-9151  
Germany +49 0 21-16-579-1151  
Italy +39 0 24-827-1151  
Netherlands +31 0 53-484-9470  
Spain +34 0 91-745-6221  
Sweden +46 0 8-751-4058  
Switzerland +41 0 1-212-0007  
United Kingdom +44 0 20-7744-0330  
Eastern Europe & others +31 0 53-484-9479  
 
17  
Product Registration  
For more efficient customer service and to activate the product’s  
warranty, Targus recommends that you register your Targus accessory  
shortly after purchasing it.  
To register your Targus accessory, go to:  
You will need to provide your full name, email address, phone number,  
and company information (if applicable).  
Warranty  
Targus warrants this product to be free from defects in materials and  
workmanship for one year. If your Targus Targus Click N Type is found  
to be defective within that time, we will promptly repair or replace it.  
This warranty does not cover accidental damage, wear and tear, or  
consequential or incidental loss. Under no conditions is Targus liable for  
loss of, or damage to, a computer; nor loss of, or damage to, programs,  
records, or data; nor any consequential or incidental damages, even if  
Targus has been informed of their possibility. This warranty does not  
affect your statutory rights.  
Warranty Registration at:  
Regulatory Compliance  
This device complies with Part 15 of the FCC Rules. Operation is  
subject to the following two conditions: (1) This device may not cause  
harmful interference, and (2) This device must accept any interference  
received, including interference that may cause undesired operation.  
FCC Statement  
Tested to Comply  
This equipment has been tested and found to comply with the limits of a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses,  
and can radiate radio frequency energy and if not installed and used in  
accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference  
will not occur in a particular installation.  
 
18  
If this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
Reorient or relocate the receiving antenna  
Increase the separation between the equipment and receiver  
Move the computer away from the receiver  
Connect the equipment into an outlet on a circuit different from that  
to which the receiver is connected.  
Microsoft, Windows and ActiveSync are registered trademarks of Microsoft Corporation. All  
other trademarks are the property of their respective owners.  
 
19  

Technicolor Thomson CRT Television EU2845ST User Manual
Telex Portable Speaker EVS 13B User Manual
Thule Automobile Accessories 065 User Manual
Tiger Games E Yo User Manual
Toshiba Projection Television 44NHM84 User Manual
Tunturi Exercise Bike C20 User Manual
Uniden Cordless Telephone ELBT 595 User Manual
VIPowER Network Card VPA 3528Net User Manual
Volkswagen Automobile Parts 01M User Manual
VTech Telephone DS6111 2 User Manual