TRENDnet Network Router TEW 436BRM User Manual

Quick Installation Guide  
TEW-436BRM  
1.01  
 
1. Before You Start  
Package Contents  
?
TEW-436BRM  
CD-ROM (User’s Guide)  
Multi-Language Quick Installation Guide  
1 x RJ-45 Ethernet Cable  
1 x RJ-11 Telephone Cable  
Power Adapter (12V DC, 1A)  
?
?
?
?
?
System Requirements  
?A working ADSL Internet Connection  
?A computer with a wired or wireless network adapter properly installed.  
?Web Browser: Internet Explorer (5.0 or above)  
 
1
Collect Internet Service Provider (ISP) Information  
During the installation of your Wireless ADSL Modem Router, the Setup Wizard will  
automatically detect your ISP connection type. If the router cannot detect your ISP  
connection type, you can manually specify the connection type. Please verify your DSL  
Internet broadband connection type with your ISP and ensure you have all the  
information for one of the following connection types:  
A. Dynamic IP connection  
ADSL Modem parameters (VPI or VCI), if it cannot be detected automatically.  
ISP may require you to use a particular Hostname or Domain name.  
B. Static or Fixed IP connection  
Internet IP Address:_____. _____._____._____ (e.g. 215.24.24.129)  
Subnet Mask: _____. _____._____._____  
Gateway IP Address: ____. _____._____._____  
Primary DNS:_____. _____._____._____  
Secondary:_____. _____._____._____  
ADSL Modem Parameters (VPI or VCI), if it cannot be detected  
automatically.  
C. PPPoE or PPPoA Dynamic IP connection  
Login User Name: _________  
Password: ________________  
ADSL Modem Parameters (VPI or VCI), if it cannot be detected  
automatically.  
D. IPoA Static or Fixed (IP over ATM) connection  
Internet IP Address:_____. _____._____._____ (e.g. 215.24.24.129)  
Subnet Mask: _____. _____._____._____  
Gateway IP Address: ____. _____._____._____  
Primary DNS:_____. _____._____._____  
Secondary:_____. _____._____._____.  
ADSL Modem Parameters (VPI or VCI), if it cannot be detected  
automatically.  
 
2
2. Hardware Installation  
1. Connect one end of the RJ-45 cable to one of  
the TEW-436BRM's LAN ports. Connect the  
other end of cable to the computer's Ethernet  
port.  
ADSL  
LAN4  
LAN3  
LAN2  
ADSL  
Terminator  
LAN1  
Power  
To PCs  
Power  
2. Connect one end of the RJ-11 cable to the  
TEW-436BRM's ADSL port. Connect the other  
end of the cable to the phone jack.  
3. Connect the AC Power Adapter to the TEW-  
436BRM and then to a power outlet.  
4. Verify that the following panel lights are on:  
Power, LAN, and WLAN. If the lights are not  
on, press the Power ON/OFF on the back of  
the TEW-436BRM.  
 
3
3. Configure the Modem  
Note: It is recommended that you configure the Modem from a wired computer.  
1. Open your web browser, type  
http://192.168.10.1 in the Address bar, and  
then press Enter.  
2. Enter the User Name and  
password and then click OK. By default:  
User name: admin  
Password: admin  
Note: User name and Password is case  
sensitive.  
3. Click Setup Wizard.  
 
4
Note:  
1. The example below is for Auto-detect. If the Setup Wizard could not automatically  
detect your Internet connection, select Manual Selection and input the information  
using the information provided by your ISP.  
2. In the example below, the ADSL connection is PPPoE  
4. Select Auto-detect and then click Next.  
5. Select the Channel Mode and then click Next.  
6. Configure the settings based on information  
provided by your ISP. Then click Next.  
 
5
Note: For other connection methods, follow the on screen instructions after you select  
auto-detect.  
7. Please wait while the TEW-436BRM reboots.  
8. Check Test Internet Connection, and then  
click Finish.  
9. Verify that the test has completed successfully.  
Check that the ADSL and Internet LEDs are lit.  
Then click Close.  
10. Open up your browser and enter in a URL  
have Internet connection.  
 
6
4. Setting up Encryption  
1. Click Setup -> Wireless -> Security.  
2. This example below is WPA2-PSK. Select the  
following:  
Encryption: WPA2(AES) WPA Authentication  
Mode: Personal (Pre-Shared Key) Pre-Shared  
Key Format: Passphrase  
Pre-Shared Key: Enter an encryption key.  
For Example: trendnet  
Then click Apply Changes. For WPA-PSK or  
WPA2-PSK, the Pre-Shared Key must be  
between 8 and 63 ASCII or 64 HEX characters.  
Make sure to copy down the encryption key.  
Your Configuration is complete  
For detailed information regarding the TEW-436BRM’s configuration and advanced settings,  
please refer to the Troubleshooting section, User's Guide CD-ROM, or TRENDnet's website  
Register Your Product  
To ensure the highest level of customer service and support, please take a moment to  
register your product Online at: www.trendnet.com/register  
Thank you for choosing TRENDnet  
 
7
Troubleshooting  
“The page cannot be displayed.” How can I get into the TEW-436BRM's web configuration  
page?  
1. Check your hardware settings again by following the instructions in Section 2.  
2. Make sure the Power, LAN and WLAN lights are lit.  
3. Make sure your TCP/IP settings are set to Obtain an IP address automatically  
(see the steps below).  
Windows Vista  
1. Go into the Control Panel, click Network and  
Internet, click Network and Sharing Center,  
click Manage Network Connections and  
then right-click the Local Area Connection  
icon and then click Properties.  
2. Click Internet Protocol Version 4 (TCP/IPv4)  
and then click Properties. Then click on  
Obtain an IP address automatically.  
Windows XP/2000  
1. Go into the Control Panel, double-click the  
Network Connections icon and then right-  
click the Local Area Connection icon and  
then click Properties.  
2. Click Internet Protocol (TCP/IP) and then  
click Properties. Then click on Obtain an IP  
address automatically.  
4. Reset the TEW-436BRM. To reset the TEW-436BRM, take a pin or paperclip and press  
the reset button on the back of the Wireless Modem for 15 seconds. Then let go.  
 
8
The Modem does not auto-detect my DSL connection. What should I do?  
1. Verify that your DSL account is activated.  
2. Make sure all the cables are properly connected (see Section 2).  
3. In Section 3, select manual selection in the Setup Wizard and configure the Modem based  
on information provided by your ISP.  
All the settings are correct, but I cannot make a wireless connection to the Modem. What  
should I do?  
1. Double check that the Wireless LED on the Modem is lit. If the Wireless LED is not lit,  
press the WIRELESS ON/OFF button on the back of the Modem.  
2. Power cycle the Modem. Unplug the power to the Modem. Wait 15 seconds, then plug  
the power back in.  
3. Contact the manufacturer of your wireless network adapter. Make sure the wireless  
network adapter is configured with the proper SSID. The default SSID of the TEW-  
436BRM is TRENDnet436. If you have enabled any encryption on the Wireless Modem,  
make sure to configure the wireless network adapter with the same encryption key.  
I forgot my login password. What should I do?  
Take a pin or paperclip and press the reset button on the back of the Wireless Modem for 15  
seconds. Then let go.  
This will return all settings to factory default. The default user name and password is admin.  
If you still encounter problems or have any questions regarding the TEW-436BRM, please contact  
TRENDnet's Technical Support Department.  
 
9
Wireless Tips  
The following are some general wireless tips to help minimize the impact of interference within an  
environment.  
Assign your network a unique SSID  
Do not use anything that would be identifying like “Smith Family Network”. Choose  
something that you would easily identify when searching for available wireless networks.  
Do not turn off the SSID broadcast  
The SSID broadcast is intended to be on and turning it off can cause connectivity issues.  
The preferred method of securing a wireless network is to choose a strong form of encryption  
with a strong and varied encryption key.  
Note: after setting up the SSID, encryption type and encryption key/passphrase, please  
make a note of them for future reference. You will need this information to connect your  
wireless computers to the wireless router/access point.  
Change the channel  
Most wireless access points and routers are defaulted to channel 6. If you have a site survey  
tool that will display the channels you can plan your channel selection around neighboring  
access points to minimize interference from them. If your site survey tool does not display  
the channel try using channels 1 or 11.  
Change the channel bandwidth  
If you are using an 802.11n router or access point you can also make the following changes.  
Change the channel bandwidth to 20/40MHz. This will provide the highest possible  
performance using an 802.11n device. Also, if using 802.11n you should be securing the  
network with WPA2 security.  
Note: Due to Wi-Fi certification considerations if you choose WEP, WPA or WPA2-TKIP  
encryption this device may operate in legacy wireless mode (802.11b/g). You may not get  
802.11n performance as these forms of encryption are not supported by the 802.11n  
specification.  
Avoid stacking hardware on top of each other to prevent overheating issues  
Maintain enough free space around the hardware for good ventilation and airflow. There  
should also be plenty of free space around the antennas to allow the wireless signal to  
propagate. Please also make sure that the wireless hardware is not placed in any type of  
shelving or enclosures.  
There are a number of other environmental factors that can impact the range of wireless  
devices.  
1. Adjust your wireless devices so that the signal is traveling in a straight path, rather than at  
an angle. The more material the signal has to pass through the more signal you will lose.  
 
10  
2. Keep the number of obstructions to a minimum. Each obstruction can reduce the range of  
a wireless device. Position the wireless devices in a manner that will minimize the amount  
of obstructions between them.  
3. Building materials can have a large impact on your wireless signal. In an indoor  
environment, try to position the wireless devices so that the signal passes through less  
dense material such as dry wall. Dense materials like metal, solid wood, glass or even  
furniture may block or degrade the signal.  
4. Antenna orientation can also have a large impact on your wireless signal. Use the wireless  
adapter's site survey tool to determine the best antenna orientation for your wireless  
devices.  
5. Interference from devices that produce RF (radio frequency) noise can also impact your  
signal. Position your wireless devices away from anything that generates RF noise, such  
as microwaves, HAM radios, Walkie-Talkies and baby monitors.  
6. Any device operating on the 2.4GHz frequency will cause interference. Devices such as  
2.4GHz cordless phones or other wireless remotes operating on the 2.4GHz frequency  
can potentially drop the wireless signal. Although the phone may not be in use, the base  
can still transmit wireless signals. Move the phone's base station as far away as possible  
from your wireless devices.  
If you are still experiencing low or no signal consider repositioning the wireless devices or installing  
additional access points. The use of higher gain antennas may also provide the necessary  
coverage depending on the environment.  
Download from Www.Somanuals.co
1
m
1
. All Manuals Search And Download.  
 
GPL/LGPL General Information  
This TRENDnet product includes free software written by third party developers. These codes are subject to the GNU  
General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). These codes are distributed WITHOUT  
WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these  
codes. The details of the GNU GPL and LGPL are included in the product CD-ROM.  
license.  
least three years from the product shipping date.  
You could also request the source codes by contacting TRENDnet.  
20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500 Fax: +1-310-961-5511  
Informations générales GPL/LGPL  
Ce produit TRENDnet comprend un logiciel libre écrit par des programmeurs tiers. Ces codes sont sujet à la GNU General  
Public License ("GPL" Licence publique générale GNU) ou à la GNU Lesser General Public License ("LGPL" Licence  
publique générale limitée GNU). Ces codes sont distribués SANS GARANTIE et sont sujets aux droits d'auteurs des  
programmeurs. TRENDnet ne fournit pas d'assistance technique pour ces codes. Les détails concernant les GPL et LGPL  
GNU sont repris sur le CD-ROM du produit.  
conditions spécifiques de chaque licence.  
Les codes source sont disponibles au téléchargement sur le site Internet de TRENDnet web site  
Vous pouvez également demander les codes source en contactant TRENDnet.  
20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500 Fax: +1-310-961-5511  
Allgemeine Informationen zu GPL/LGPL  
freie Software „Linux „mtd“ (Memory Technology Devices) Implementation (© 2000 David Woodhouse), erstmals integriert in  
Linux Version 2.4.0-test 3 v. 10.07.2000 (http://www.kernel.org/pub/linux/kernel/v2.4/old-test-kernels/linux-2.4.0-test3.tar.bz2),  
sowie weitere freie Software. Sie haben durch den Erwerb dieses Produktes keinerlei Gewährleistungsansprüche gegen die  
Berechtigten an der oben genannten Software erworben; weil diese die Software kostenfrei lizenzieren gewähren sie keine  
Haftung gemäß unten abgedruckten Lizenzbedingungen. Die Software darf von jedermann im Quell-und Objektcode unter  
Beachtung der Lizenzbedingungen der GNU General Public License Version 2, und GNU Lesser General Public License  
(LGPL) vervielfältigt, verbreitet und verarbeitet werden. Die Lizenz ist unten im englischsprachigen Originalwortlaut  
wiedergegeben. Eine nichtoffizielle Übersetzung in die deutsche Sprache finden Sie im Internet unter  
mitgelieferten CD-ROM.  
des Downloads verfügen können Sie bei TRENDnet.  
20675 Manhattan Place, Torrance, CA 90501 -U.S.A -, Tel.: +1-310-961-5500, Fax: +1-310-961-5511 die Software anfordern.  
Información general sobre la GPL/LGPL  
Este producto de TRENDnet incluye un programa gratuito desarrollado por terceros. Estos códigos están sujetos a la  
Licencia pública general de GNU (“GPL”) o la Licencia pública general limitada de GNU (“LGPL”). Estos códigos son  
distribuidos SIN GARANTÍA y están sujetos a las leyes de propiedad intelectual de sus desarrolladores. TRENDnet no ofrece  
servicio técnico para estos códigos. Los detalles sobre las licencias GPL y LGPL de GNU se incluyen en el CD-ROM del  
producto.  
específicas de cada licencia.  
Los códigos fuentes están disponibles para ser descargados del sitio Web de TRENDnet  
También puede solicitar el código fuente llamando a TRENDnet.  
20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500 Fax: +1-310-961-5511  
Îáùàÿ èíôîðìàöèÿ î ëèöåíçèÿõ GPL/LGPL  
 ñîñòàâ äàííîãî ïðîäóêòà TRENDnet âõîäèò áåñïëàòíîå ïðîãðàììíîå îáåñïå÷åíèå, íàïèñàííîå ñòîðîííèìè  
ðàçðàáîò÷èêàìè. Ýòî ÏÎ ðàñïðîñòðàíÿåòñÿ íà óñëîâèÿõ ëèöåíçèé GNU General Public License ("GPL") èëè GNU  
Lesser General Public License ("LGPL"). Ïðîãðàììû ðàñïðîñòðàíÿþòñÿ ÁÅÇ ÃÀÐÀÍÒÈÈ è îõðàíÿþòñÿ àâòîðñêèìè  
ïðàâàìè ðàçðàáîò÷èêîâ. TRENDnet íå îêàçûâàåò òåõíè÷åñêóþ ïîääåðæêó ýòîãî ïðîãðàììíîãî îáåñïå÷åíèÿ.  
Ïîäðîáíîå îïèñàíèå ëèöåíçèé GNU GPL è LGPL ìîæíî íàéòè íà êîìïàêò-äèñêå, ïðèëàãàåìîì ê ïðîäóêòó.  
 ïóíêòàõ (http://www.gnu.org/licenses/gpl.txt) è (http://www.gnu.org/licenses/lgpl.txt) èçëîæåíû êîíêðåòíûå óñëîâèÿ  
êàæäîé èç ëèöåíçèé.  
Èñõîäíûé êîä ïðîãðàìì äîñòóïåí äëÿ çàãðóçêè ñ âåá-ñàéòà TRENDnet (http://trendnet.com/downloads/list_gpl.asp) â  
òå÷åíèå, êàê ìèíèìóì, òðåõ ëåò ñî äíÿ ïîñòàâêè ïðîäóêòà.  
Êðîìå òîãî, èñõîäíûé êîä ìîæíî çàïðîñèòü ïî àäðåñó TRENDnet.  
20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500 Fax: +1-310-961-5511  
 
GPL/LGPL informações Gerais  
Este produto TRENDnet inclui software gratuito desenvolvido por terceiros. Estes códigos estão sujeitos ao GPL (GNU  
General Public License) ou ao LGPL (GNU Lesser General Public License). Estes códigos são distribuídos SEM GARANTIA  
e estão sujeitos aos direitos autorais dos desenvolvedores. TRENDnet não presta suporte técnico a estes códigos. Os  
detalhes do GNU GPL e do LGPL estão no CD-ROM do produto.  
licença.  
Os códigos fonte estão disponíveis para download no site da TRENDnet (http://trendnet.com/langen/downloads/list_gpl.asp)  
por pelo menos três anos da data de embarque do produto.  
Você também pode solicitar os códigos fonte contactando TRENDnet, 20675 Manhattan Place, Torrance, CA 90501,  
USA.Tel: +1-310-961-5500, Fax: +1-310-961-5511.  
GPL/LGPL üldinformatsioon  
See TRENDneti toode sisaldab vaba tarkvara, mis on kirjutatud kolmanda osapoole poolt. Koodid on allutatud GNU (General  
Public License) Üldise Avaliku Litsentsi (GPL) või GNU (Lesser General Public License) ("LGPL") Vähem Üldine Avalik  
Litsentsiga. Koode vahendatakse ILMA GARANTIITA ja need on allutatud arendajate poolt. TRENDnet ei anna koodidele  
tehnilist tuge. Detailsemat infot GNU GPL ja LGPL kohta leiate toote CD-ROMil. Infot mõlema litsentsi spetsiifiliste terminite  
Samuti võite lähtekoodi paluda TRENDneti'lt, 20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500,  
Fax: +1-310-961-5511.  
 
 

The Siemon Company Switch S66M1 50 User Manual
Toshiba DVR XVSe16 480 X User Manual
Toyota Automobile RAV 4 User Manual
Transcend Information Computer Hardware TS2G 8GCF266 User Manual
Tripp Lite TV Cables P136 000 User Manual
Uniden Scanner UBC144XLT User Manual
ViewSonic Flat Panel Television N4290p User Manual
Vision Fitness Home Gym ST710 User Manual
VTech Telephone LS6245 User Manual
Weed Eater Lawn Mower 191064 User Manual